ampage archive

Vintage threads from the first ten years

what is up with prs

 

11/10/2005 1:00 PM
eruannu	what is up with prs why does prs use the extra cap soldered to the vol pot? any body know or is it just my plank thats weird

 

11/10/2005 4:53 PM
Spence	It's a treble bleed capacitor designed to retain the treble frquencies as you roll off the volume.

 
 

Monday

Book Of The Day

The Ultimate Tone, Volume III by Kevin O'Connor Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self. Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.

 

11/11/2005 7:38 PM
Steve A.	180pF is the value I've heard

 

11/15/2005 2:38 PM
eruannu	yeah Im sorry would a Known that if i looked it up intead of throwing the question out like that and ened up looking ignorant "which i was by the way"

 

Page 1 of 1