Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!
|Listen to great tunes streaming live right now!|
|11/17/2005 2:47 PM|
|starfish||Wiring a reverse phase jumper cable|
What is the proper way to reverse phase on a TS 1/4" guitar cable. This will be used for jumpering two out of phase guitar amp channels. (brilliant and normal channels of a rear panel Top Boosted JMI AC30).
Perhaps with an inverting buffer circuit or a 1:1 transformer. There's no way to simply reverse the signal wires since one is directly connected to ground.
|Book Of The Day||
The Ultimate Tone, Volume III by Kevin O'Connor
Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
Yeah, you'd need to go to balanced, reverse the phase and then back to unbalanced. A good DI box would do that, I think.
Any single-transistor fuzzbox or wah pedal will do what you're after - but may not be the sound you want.
What about wiring a reverse-phase speaker cable for one of the amps - or swapping the speaker leads of it's a combo?
Oh, this is two out-of-phase inputs on the same amp?
|11/17/2005 8:17 PM|
Yes, this is two out of phase inputs on the same amp.
|11/18/2005 12:12 PM|
You could rewire the amp so that both channels sum before the tone stack driver - like a Marshall preamp, or you could have the normal channel sum with the Vib. Channel on the other side of the phase inverter. Then you could use a normal Y cord to join the channels.
|11/21/2005 12:35 AM|
Have you heard of the new AC30CC? It evidently has a switch to allow you to jumper the two channels together:
Looks pretty slick and the price is better than the reissues.
|11/21/2005 5:18 PM|
Funny - it doesn't mention solving the phasing issue, just says that many people have jumpered the channels with a Y cord and that they added an internal switch to do the job. I know of one customer of mine that uses a standard Y between the Normal and Brilliant (TB) channel and likes the way it sounds. There is going to be some additional phase shift through the tone stack of the TB channel, so the two channels will never be perfectly in-phase anyway.
|Page 1 of 4||Next>||Last Page>>|