Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Marshall 2205 drive channel has low Vol.

3/27/2006 7:45 PM
LM Marshall 2205 drive channel has low Vol.
The clean channel works fine.Switch it to the red channel and it has little volume.Would the CA3046 IC have anything to do with it? My friend just got this on Ebay and everything was suppose to be working.Thanks LM
3/27/2006 9:45 PM
I did swap the tubes around.Thanks
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
3/28/2006 1:38 AM

Before I worry about the IC, I'd be going through the tube stages looking for missing plate voltage or dead tube sections.
   Page 1 of 1