ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Re: How do you check for voltage on the chassis?


 
9/29/2005 3:59 PM
Ricky Re: How do you check for voltage on the chassis?
I moved some ground wires around(changed grounding scheme a bit) somehow the voltage on the chassis is down to around 3v now, and the amp seems to be working better. Less of the midrange hum too. I don't know what was going on. I think I have inadvertantly helped it though.
 
9/29/2005 5:00 PM
Carl Gigun
I'd think you should really plug into a grounded outlet. I have the same thing in my house, almost all of the outlets were changed to three holes at some point in time, but only about half of them really have a ground connection. I just run an extension cord from one of the good ones to my practice area. If your amp is designed for a three prong plug you should give it what it wants :)
 
<<First Page<Prev Page 2 of 2