ampage archive

Vintage threads from the first ten years

Special Covers

 

2/16/2004 7:58 PM
Andy	Special Covers Here's one for you all-     Anyone know of anyone who could produce a limited number of special sized metal covers, nickel plated ballpark about twice the size of standard humbucker covers. Likely to need about 200 pieces?     Rough cost per item?     Andy

 

2/16/2004 9:40 PM
SK	Try here http://mfgquote.com/

 
 

Tuesday

Book Of The Day

The Ultimate Tone, Volume III by Kevin O'Connor Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self. Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.

 

2/18/2004 5:21 AM
anonymous	Re: Special Covers Hipshot might be another source of either manufacture or of a better source.

 

2/18/2004 7:11 PM
Jason Lollar	Boris at hipshot did express interest in doing metal work when I talked to him at the last NAMM show.

 

Page 1 of 1