ampage archive

Vintage threads from the first ten years

P-90 for strat string spacing

 

8/14/2003 6:12 AM
TimC	P-90 for strat string spacing Does anyone know of a P-90 type pick-up that has pole pieces that line up with the 2 1/8" spacing needed for a Strat in the bridge position? The guitar in question currently has a Duncan humbucker and I'm wanting to go to a single coil. Thanks, Tim

 

8/14/2003 4:22 PM
Jason Lollar	You have to have that custom made.

 
 

Tuesday

Book Of The Day

The Ultimate Tone, Volume III by Kevin O'Connor Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self. Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.

 

8/15/2003 4:09 AM
TimC	Thanks for the info Jason. Which company would you suggest for a custom, and about how much would they charge?

 

8/15/2003 5:03 PM
Jason Lollar	Look on the list to the right when you first enter the board.

 

Page 1 of 1