ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Re: No CT on PT, how to lower B+ ????


 
1/18/2004 8:15 PM
ted m Re: No CT on PT, how to lower B+ ????
Ian,  
Try putting together a box with a couple of levitron wall outlets in series (if you buy the duals, plug one up on each with those safety plastic deals. put a 300W bulb in one (or get Y adapter and two 150W bulbs, or a 200W + 100W, etc.), and your amp plug in the other.  
 
Check your heater voltages, make sure they're not dropping more than ~10%, your plate voltages should be nicely dropped.
 
1/18/2004 10:52 PM
Ian Anderson
email

Levitron wall outlets? - are we talking lightbulbs here? If so, this amp is a touring amp and doesn't get the kid gloves treatment, so I think lightbulbs to drop the voltage down is not a rugged enough solution. Cheers anyway - I'll go with the zeners.  
 
... Ian :)
 
 
  Sunday
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
 
1/19/2004 5:55 AM
ted m
heavy duty (garage door light bulbs, outdoor type bulbs) from GE and Sylvania can be quite rugged.
 
1/19/2004 7:28 AM
Ian Anderson
email

quote:
"heavy duty (garage door light bulbs, outdoor type bulbs) from GE and Sylvania can be quite rugged "
 
 
yeah but you know what I mean - lightbulbs=bulky & fragile, zeners=small & tough.  
 
I'll post results when I get through with this.  
 
Cheers... Ian :)
 
1/19/2004 11:11 AM
Steve Conner
email

Ian, it looks like those zeners would be fine for seriesing if you were using them as screen droppers. The power dissipation won't be that great. If you were using them to drop the plate voltage they most definitely would need heatsunk.  
 
You can actually buy insulating kits that let you isolate those studmount diodes from the heatsink. Try RS, Farnell, etc. Or just use a little heatsink for each diode and screw the heatsinks onto some kind of plastic insulator support.  
 
P.S. A Levitron outlet sounds like what you would plug your Lifter into :D
 
<<First Page<Prev Page 4 of 4