ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Fenler DE LUXE REVERB AMP ?


 
1/24/2001 5:15 AM
anonymous
email
Fenler DE LUXE REVERB AMP ?
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1405886974 :D
 
1/24/2001 5:28 AM
Hi
email

So I suppose the birth rate is faster than Barnum used to say, eh?  
 
Hi
 
 
  Friday
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
 
1/24/2001 6:34 AM
Rebel420
email

*laugh* it IS macdaddy cool *laugh*  
 
12aux7 eh? is that like 1/2 the triode is a 12ax7, and the other half a 12au7?  
 
I can honestly say I've nevr seen anything like this before!!
 
1/30/2001 1:30 AM
Steve Slick
email

Hi,  
 
 
 
Right you are, as usual. I have always maintained that Barnum was off by an order of magnitude. Proof? Just look at the guitars and amps on e-bay.  
 
 
 
Q.E.D.  
 
 
 
That is all.  
 
 
 
Cheers,  
 
 
 
Steve Slick
 
1/24/2001 7:06 AM
Steve A.
email

tboy:  
 
 
 
    Any idea when Fender would have put that out? The front panel looks more like a Silvertone...  
 
 
 
    So that is the reverb springs mounted on an angle on the chassis?  
 
 
 
--Strange!  
 
 
 
Steve Ahola
 
1/24/2001 7:21 AM
anonymous
email

I don't think Fender ever did put that out, Steve. If you'll take a closer look at the photos of the front panel, you'll see the logo actually says "Fenler."  
 
 
 
The styling is after the look of the solid state Fenders of the late sixties, but I've never seen one of those with tubes in it.  
 
 
 
--tboy
 
1/24/2001 7:59 AM
Bruce
email

Probably built in and for GI's stationed in Korea, Philippines or built in some other Asian country in a little sweat shop during the 60's.  
 
The Elk amps that pop up once in a while are carefully similar to Fender amps too but made pretty poorly.  
 
Bruce
 
   Page 1 of 2 Next> Last Page>>