Help finding some dual ganged audio pots.(Randall?)

3/17/2000 4:19 AM

John S.

Help finding some dual ganged audio pots.(Randall?) Hello all.....Trace and I are trying to find some dual ganged pots in an audio taper if possible in the following values.....50k..250k and 1 meg.Any help on where we might find these would be greatly appreciated....These are going into an old Harmon Kardon stereo tube amp that will be converted over to a two channel guitar amp....We only need 1 each of the 2 values,and 3 of the dual ganged audio taper 1 megs..Thanks.....John S.

3/17/2000 4:38 AM
Bruce	Hey John, go here:     http://www.mouser.com/products/listpage.cfm?PageNbr=197&MaxPerPage=25     Look right about the center of the page.     Bruce

Tuesday

Book Of The Day

The Ultimate Tone, Volume III by Kevin O'Connor Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self. Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.

3/17/2000 2:38 PM
John S.	Thanks Bruce....I had the Mouser catalog here and forgot to look....I e mailed Trace also and told him that I thought they might have sold these..Thanks Bruce.John S.