ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Tremolux bias mod


 
7/30/2000 8:46 PM
Cliff
email
Tremolux bias mod
I have a '62 Tremolux that is in excellent condition, but I'd like to add a bias pot to it. The only problem is that the tremolo circuit and the bias feed make this seem impossible without disconnecting one or the other.Is there a method to swap this fixed-bias setup to adjustable, and keep the tremolo intact ?
 
8/1/2000 2:25 AM
Randy Jamz
email

Without knowing which schematic to use, I can't say exactly which resistor to remove, but they all look pretty simple. The object of the game is to;  
1)Remove the paralell resistor from the bias filter capacitor. Usually it appears to be about 33K paralelled with a 25uF/50VDC capacitor.  
2)Replace it with a 27K resistor and a 10K pot.  
3)If the range isn't enough, try 33K with a 10K pot.  
Simple, and it will work, although why modify a '62 Tremolux? (Sigh!)  
Randy.
 
 
  Saturday
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
 
8/3/2000 5:55 AM
Nils
email

Cliff,  
 
I have the same question about my VibroVerb-clone.  
 
I have done the mod that Randy suggests and the  
wiper of the bias pot is connected to the Intensity  
pot, so the tremolo "follows" the bias adjustments  
I make.  
 
I think it should be this way but I'm not sure  
 
Nils
 
8/5/2000 6:08 PM
Cliff
email

Nils, I was waiting to see if anyone had tried this, and what Randy said looks easy enough... any sacrifice in sound ? I also noticed that when the tremolo is on, the power tubes seem to "follow" the setting. Does this mean that the bias goes up and down until the tremolo is off ? (confusing!)thanks for the info Cliff
 
8/7/2000 6:44 AM
Nils
email

Cliff,  
 
I'll soon give you an update on the sound  
at different bias settings.  
Since I haven't heard this type of tremolo  
before I really don't know how it's supposed  
to sound, but I personally would like to  
be able to get more depth (intensity).  
 
Does this mean that the bias goes up and down until the tremolo is off ?  
 
Yes, and quite a lot too.  
 
Nils
 
   Page 1 of 1