ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

5F6A vs.'59 Reissue


 
2/21/2000 6:52 PM
Captain Beefheart
email
5F6A vs.'59 Reissue
If I build the 5F6A from Hoffman, can I trust it will sound better than the reissue 1959 Bassman I played in my local music store the other night?...it sounded like crap, and the guy wouldn't let me play it loud enough to test its distorted tone for very long.
 
2/21/2000 9:05 PM
DonJ
email

capt. I built a 5f6a from hoffman that was built to exact specs with all parts from him and I think it will blow away the 59 RI bassman. it is one mean tone machine
 
 
  Wednesday
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
 
2/22/2000 12:52 AM
Richie
email

All the reissues i have been into so far may have alot of the same electronic values..but not the same,and PCBoards. You ever watch an old movie where they put up fake houses and stores, background,.. this is what it reminds me of..Richie{~}==:::
 
2/23/2000 4:40 AM
Steve Ahola
email

Cap:  
 
    With its printed circuit boards the Fender reissue amp will be a headache to mod or repair. If you build the Hoffman kit, you will be able to fine-tune the circuit all you want without having to deal with the PCB hassles. Like trying out different types or values of the caps. The sound you get will depend on the transformers you use, and the Hoffman ones are supposed to be great.  
 
    When you figure in the value of your time, it'd probably be cheaper to buy a used RI, but look at it this way: some people pay money to go to school to learn about electronics. And I doubt if there are many school that will teach you how to build guitar amps!  
 
--Good luck with your Hoffman kit!  
 
Steve Ahola
 
2/23/2000 7:16 PM
anonymous
Thanks for the encouragement. I do realize I'll probably endu up paying more in the long run, but like you say, i'll be able to fine-tune it the way I want it to sound. About two years ago, I started building stompoboxes myself. I've made a few for myself and for friends, and I probably never have to buy another one commercially. I think its even made me a more concious and valuable player.  
 
Most of all, I guy like me with no math ability whatsoever can do this stuff. Its so satisfying. But thats why everyone does this stuff right?
 
   Page 1 of 1