Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!
|Listen to great tunes streaming live right now!|
|8/6/2000 6:48 PM|
||Ross Dist./Phaser Schem. Needed!|
The board on mine has some burnt traces due to a short and it is kind of tough getting it going w/o a schematic. Can anyone help me out?
|8/7/2000 12:14 AM|
After fixing the shorting problem, to repair the burnt tracks, use resistor lead cut offs and solder them to the tracks. For longer runs of tracks, use insulated wire. You can attach the wire to the board using a small amount of super glue to hold it in place
|Book Of The Day||
The Ultimate Tone, Volume III by Kevin O'Connor
Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
|8/7/2000 5:29 PM|
Thanks for the reply--That's exactly what I did, though. Except instead of resistor leads I used solid core wire that had been stripped.
|8/7/2000 10:51 PM|
Yep, that'll work too! I'm used to working on very thin track circuit board, so resistor leads sprung straight to mind. And if you've got very thick tracks like on power supplies, used soldering braid works great too.
|Page 1 of 1|