ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Re: Making choices in the MN3xxx series


 
1/5/1999 5:56 AM
Jack Orman
Website
Re: Making choices in the MN3xxx series
quote:
"gimme a BBD that uses relays for TRUE bypass!! Sorry about that. Brief psychotic episode.)"
 
 
For a brief microsecond I must have shifted into psychotic overdrive as well since I contemplated building it until I realized that you wouldn't able to hear the guitar for the clicking of the 1,024 relays!  
 
:) JACK  
 
http://www.mp3.com/music/Rock/2344.html
 
1/5/1999 7:00 AM
Mark Hammer
email

That's the beauty of it Jack. Set the delay time right and you don't even need a drummer!  
 
:)
 
 
  Monday
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
 
1/5/1999 4:12 PM
R.G.
Website
email

My amp tech friend once asked me to design him an all tube digital delay.  
 
I did some quick calculations and found that for a 16 bit data word and an 8K stage delay, you need a minimum of a quarter - million - 12A?7's just for the digital delay section, with about a 1 megawatt(!) power source to run them.  
 
That doesn't count the input/output amps, analog housekeeping stuff, and all tube A to D conversion, but I figured that this stuff wouldn't materially change the overall tube count, power supply or cost.  
 
He decided not to have me build it, for some reason.
 
1/5/1999 9:04 PM
Mark Hammer
email

As the late Pat Paulsen used to say, "Picky, picky, picky."
 
1/6/1999 5:19 AM
Paul Perry
email

I've seen an all tube delay, based on a long glass tube of mercury... it was used in a WW2 airfield radar system, where the ground clutter was delayed and inverted, so stationary objects cancelled out. From memory it was 30 feet or so of mercury, which (reaching for my copy of Weast) is 1450 m/sec,  
.....nah, stick with the MNxxxx.
 
<<First Page<Prev Page 3 of 3