Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  


6/7/1999 8:52 PM
Steve A.
    So you are using the "NoFrames" version of the BBS, too, or have you been able to figure out a workaround with the "Frames" version? (Maybe I'm missing something, but I need to hit "Back" up to a dozen times or more to be able to select a different forum...)  
Steve Ahola
6/8/1999 5:15 AM

No workaround.. I The BBS works fine @ the office, just not at home on 4.6. Wierd.
Book Of The Day The Ultimate Tone, Volume III by Kevin O'Connor
Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn’t change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the “iconic” amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product. Eyelet-board and chassis-mounted tube socket construction is used throughout, for easy servicing and modding. TUT3 is very accessible even if you cannot fully read a schematic and is a "must have" if you are going to build an amp for your self.

Note: The Ampage Archive is an Amazon Associate site. A small commission is paid to the site owner on any qualified purchase made after clicking an associate link such as the one above.
6/8/1999 11:28 AM
Don Symes

If you hold or pull down on the 'back' button, you can back up some 10 steps by going to the bottom of the selection list.  
Does that count?
   Page 1 of 1