ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: Wolfe Macleod No. Both coils are same-wound. The ... -- 1142893071 View Thread

Re: The proper way for reverse winding of humbuckers

3/21/2006 10:41 AM
Zhangliqun
email
Re: The proper way for reverse winding of humbuckers
"No. Both coils are same-wound. The outer leads become the series link. Coils should be counter-clockwise start to finish when viewed from the top.  
Humming and buzzing starts to happen when the coils are too far mis-matched, but you also get better high-end response."  
 
But is it okay to take my opposite approach, starts (inner leads) as series link? It seems to work fine with no phasing problems with other pickups.  
 
And is it just me, or is Larry D a wee bit unpopular in here?  
 
(Yes, I know the answer, so put down those pies and tomatoes!)

 
Replies:
Gibson Guy Larry D is a cheating, lying scumba... -- 3/21/2006 12:04 PM
SK yes, starts as the series link is f... -- 3/21/2006 3:25 PM