Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!
|Listen to great tunes streaming live right now!|
|previous: Amp Guy "If you swap the wires connected to... -- 1110095048||View Thread|
|3/6/2005 10:12 PM|
|Thorny||Re: 5E3 Volume Pot Taper Discovery|
Looking on the back of the 1M volume pot, and labeling the 3 terminals left to right from the back as 1, 2, and 3. I swapped the wires going to 2 and 3.
1 is grounded.
2 goes to the .1 uf cap coming from V1
3 goes to V2 pin 2.
I left 1 grounded.
I changed 2 to V2 pin 2
3 to .1 uf cap coming from V1
This seems to make the volume more smoothly adjust, but if either volume is less than 3 it messes with the other one. If you look at most of the other fender amps they are wired like I changed it, not like the deluxe.
|Chris@CMWamps circuit idea -- 3/7/2005 3:46 AM|