ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: bob p 270FX out of chassis: primary ... -- 3/22/2004 10:34 PM View Thread

Re: Can anyone measure their PT's DC resistance?

3/24/2004 6:09 PM
Bradster2kRe: Can anyone measure their PT's DC resistance?
Thanks Mark and Bob, I'll gladly add these to the list.  
 
Mark, yes, I would like to take you up on that offer to post *.psu files and perhaps you can even help with reviewing/editing them too if you feel so inclined? (I'll need an email address)  
 
Anybody else got any Hammond's, or how about Marshall, Fender, Heybower, OEI, Sovtek PT's?  
 
Here's what I've got so far:
 
Make/Model DC-Pri DC-Sec Advertised spec contributed by:  
___________________OHMS_____OHMS_______________________________________  
 
Hammond/269EX 11.8 275.0 260-0-260 90mA (Mark Lavelle, ampage)  
Hammond/270DAX 5.0 178.0 260-0-260 90mA (Mark Lavelle, ampage)  
Hammond/270EX 2.8 63.5 275-0-275 125mA (Budso, AX84)  
Hammond/270FX 9.1 94.5 275-0-275 125mA (Bob P, ampage)  
Hammond/271X 7.0 170.0 280-0-280 60mA (Budso, AX84)  
Hammond/272DX 3.0 61.0 300-0-300 125mA (Budso, AX84)  
Hammond/272FX 2.3 101.0 300-0-300 150mA (Dan Souder, AX84)  
Hammond/272JX 1.4 45.0 300-0-300 250mA (Philip Ruetz, AX84)  
Hammond/273BX 1.6 72.3 350-0-350 175mA (KM, ampage)  
Hammond/278CX 1.0 21.9 400-0-400 465mA (Jason D, AX84)  
 
Heyboer/PT-250  
(HTS-7110) 3.22 88.5 250-0-250 150mA (Mark Lavelle, ampage)  
 
 
Anybody else feel like jumping-in please do, the list can only get better. Looking for more Hammond's, Marshall, Fender, Heybower, OEI, Sovtek etc.  
 
Thanks to all who have contributed so far.  
 
-Brad

 
Replies:
Mark Lavelle [QUOTE]Mark, yes, I would like to t... -- 3/24/2004 11:50 PM
Bruce /Mission Amps I'm curious as to the need for the ... -- 3/25/2004 5:39 PM