ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.	New: view Recent Searches. New: visit Schematic Hell! The sunn still shines online!

Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

previous: Mark Buckingham Do you really need the tone stack? ... -- 5/11/2003 2:20 PM	View Thread

Re: EF86 w/ Baxandall - Not enough gain

5/11/2003 5:18 PM
Scroggins	Re: EF86 w/ Baxandall - Not enough gain I really do. This amp will have two channels and a master cut control. The baxandall TS that I installed sounds fine, but the level is too low. I'm thinking of feeding the EF86 with a 12AX7 and see if that will still have that chime that an EF86 has. Aside from using a split plate load, how can I add gain to this channel without changing the already great sound that I have? Thanks guys!

5/11/2003 5:18 PM

Scroggins

Re: EF86 w/ Baxandall - Not enough gain

I really do. This amp will have two channels and a master cut control. The baxandall TS that I installed sounds fine, but the level is too low. I'm thinking of feeding the EF86 with a 12AX7 and see if that will still have that chime that an EF86 has.

Aside from using a split plate load, how can I add gain to this channel without changing the already great sound that I have?

Thanks guys!