ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: kluson guy Check this out!http://www.jocke... -- 9/22/2002 5:43 AM View Thread

Re: DIY Spring reverb. This is so cool!!

9/23/2002 4:19 AM
Mark Hammer
email
Re: DIY Spring reverb. This is so cool!!
I did a similar thing with a smaller spring I got from Home Depot and smaller speakers. The glueing part is the hardest part.  
 
Since the speaker cones of that type/size of speaker is usually paper and not terribly stiff, they are tricky to cut (you need to remove as much of the cone as you can so that you hear the spring and not the speaker signal). I've had luck by painting on some diluted white glue onto the cone. When it dried the speaker cone was nice and stiff and very easy to cut with a utility/Xacto knife.

 
Replies:
kluson guy Well...How did it sound? -- 9/23/2002 7:03 AM