ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.	New: view Recent Searches. New: visit Schematic Hell! The sunn still shines online!

Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

previous: Aharon Colman When I am reading the lay-out for t... -- 1/16/2001 7:54 AM	View Thread

Re: Help with Insanity box

1/16/2001 9:02 PM
Tonda	Re: Help with Insanity box I build this effect, and it works good. Look, if your layout is correctly oriented. On the file which I downloaded it was MIRRORIMAGE. I don«t know which technique you will use for PCB making. I have only one problem with INSANITY BOX. Sounds like with noise gate. Tone is long, good sustained, but it ends shortly, with no natural decay. I put this 50k trimmer for biasing as in schematic, but problem is still here. I used CD 4049 and TL 071 opamp. Good luck Tonda

1/16/2001 9:02 PM

Tonda

Re: Help with Insanity box

I build this effect, and it works good.

Look, if your layout is correctly oriented. On the file which I downloaded it was MIRRORIMAGE.

I don«t know which technique you will use for PCB making.

I have only one problem with INSANITY BOX.

Sounds like with noise gate. Tone is long, good sustained, but it ends shortly, with no natural decay.

I put this 50k trimmer for biasing as in schematic, but problem is still here. I used CD 4049 and TL 071 opamp.

Good luck

Tonda

Replies:

Aharon Colman Re: Help with Insanity box(thanks Tonda) -- 1/17/2001 12:15 AM
aron Re: Help with Insanity box -- 1/17/2001 8:34 PM