ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
  View Thread

Help - Insanity Box

12/3/2000 6:29 AM
Bill
email
Help - Insanity Box
I'm rebuilding an Insanity Box and noticed the pcb call for 100uf cap not shown on the schematic. A note on the schematic says something about a 10uf cap that's not needed. If they are one in the same and you remove it, do put a jumper in its place? Also is it necessary to tie the unused inputs of the 4049 cmos to ground?  
thanks.....Bill

 
Replies:
morgan put in the 100uf.It should be t... -- 12/3/2000 7:25 AM
Matwey Unused inputs of the 4049 chip must... -- 12/3/2000 7:50 AM