ampage
Tube Amps / Music Electronics		 For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

Re: How to interpret resonance freq.


 :
6/2/2006 10:28 PM
Mystic Re: How to interpret resonance freq.
Probably a mismatch between the coils. It's hard to get two that match perfectly.
  
6/5/2006 10:38 AM
Zhangliqun
"Probably a mismatch between the coils."  
 
Hard to believe I didn't mention that one since mismatched buckers are my bread and butter.
  
6/2/2006 8:51 PM
Artie
>>Is this Artie from the Duncan Forum?  
 
Yup. ;-) If Ampage had a "vault", this would belong there. Thanks again. Great info.  
 
(Not sure what happened with that previous reply.)
  
6/5/2006 11:08 AM
David Schwab
On 6/3/2006 12:28 AM, Zhangliqun said:  
quote:
"* Pole piece thickness: I've found that the larger heads on the Gibson pole pieces give a beefier tone than the poles with the smaller Duncan-size heads. This also applies to rod magnets, up to a point -- if they're a little thicker, the magnetic field is wider and you'll get a little more beef."
 
 
Yes, and also the bigger the poles the higher the inductance.
  

<<First Page<PrevPage 2 of 2