ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

Re: reverb


 :
9/23/2004 6:54 PM
Enzo
Re: reverb
Yes it matters. That is why the jacks on the pan are marked input and output. If not sure which, turn on the amp and have the reverb half way up. Then touch the tips of the two cables. The one that hums is the return cable and it goes to the OUTPUT jack on the pan.  
 
The 20 ohm end would be the drive and the 200 ohm end would be the return.
 
Today
ampage
archive
And now, a word from our sponsors:


 
9/23/2004 7:12 PM
JC

Easy when you know..  
Thanks!
 

<<First Page<PrevPage 3 of 3