| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
Scandanavia
:
 9/8/2002 2:47 PM |
||
| R.G. | Scandanavia
From my very short (6 hour) visit to Stockholm, I'd say that you're right - all the girls are blond and pretty! Could be hard on the wives and husbands, though 
R.G. | |
|---|---|---|
| 9/8/2002 5:08 PM |
||
Dr. Strangelove |
Re: Tensioners RG wrote:
Perhaps by mounting a pully on a postal scale and pre-loading it for 1 ounce (~ 28 grams). I looked at commercial wire tensioners or "dereelers" for coil winding and simplest mechanical ones look like a mixture of pinch rollers plus a spring-loaded pulley on a swing arm. The best picture I could find for one is at <http://www.azonicproducts.com/30-40.htm> Note the felt wheel at the lower left. More general stuff at: <http://www.rebima.com/met_tensioner.html> <http://www.necoa.net/products/> <http://www.mcsinc.net/mcs_dereeler_options.htm> Electronic closed-loop servo-controlled tensioners sit at the top in performance. No prices that I can tell, but I imagine that the cheapest ones cost hundreds of dollars. If you can get good results with felt pads or sewing machine guides instead of spending $$$, well... -drh -- | |
|---|---|---|
| <<First Page | <Prev | Page 2 of 2 |