Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!
|Listen to great tunes streaming live right now!|
|1/28/2004 5:01 AM|
||Re: LDR Switching Questions|
Looking at the SLO schem - when the clean channel is active, it looks like the overdrive preamp volume can load down the circuit depending on where it is set because it is not disconnected. Is that correct or am I missing something? I would like that an LDR in series should be used before the overdrive volume to isolate it.
|1/28/2004 5:28 AM|
all 3 channels need an LDR in series b4 the gain pot of each. wont work otherwise. sounds...not good.
|1/29/2004 4:30 AM|
I was referring to the SLO schematic in my last post. Is that schematic incorrect like the X88r?
|1/29/2004 11:36 PM|
sorry i misread. my bad. but, no, the SLO does not have that problem. it has a relay isolating the 2 channels, IIRC. good luck.
|<<First Page||<Prev||Page 4 of 4|