ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

Rode NT1000 condenser mic


 :
4/6/2003 6:25 PM
Stephen Giles Rode NT1000 condenser mic
I've just ordered one of these - anyone had any experience of recording with it? Seems to have magnificent specs.
 
4/7/2003 1:32 AM
LFOscalator
I have no experience with this mic, however Sound on Sound magazine has a good review on it.  
 
Here's the link for the SOS search engine.  
 
http://www.sospubs.co.uk/search/query.asp  
 
Once there, enter "Rode NT1000" and you'll see the article.  
 
 
LFO
 
4/7/2003 3:47 PM
Gus

I own one. I bought it because of its reviews. I could not stand it stock. I replaced 5 caps and it sounds better. The replacement was not easy it is a SMD board so fitting full size polypros and a polystyene was a pain. The way Rode has the capsule made, by I believe 797 audio tends to make the "higher mids"? hotter. I think it might be better for female vocals.  
 
Funny thing I find I like a modded MXL1006 better I have 5 of the 1006s. I read the reviews of the nt1000 and bought it unheard, if I did not like how it was built and the low noise I would have returned it. Modded it is OK. I might even replace the capsule.  
 
I have a Brauner VM1. Neumann TLM103(I might mod the TLM)a number of MXL67s,2001s,1006s,603s at4033s,samson c01s,oktava MK012,nady tcm1050s and a 950,gefell 692. Almost all are modded Tube and Transistor circuits except for the Brauner and the Neumann.  
 
Don't believe the reviews on the web. I have about 30 condenser microphones total.  
 
Steve email for the nt1000 mod pictures and other microphone mods if you want.  
 
Gus
 
4/7/2003 10:17 PM
LFOscalator
How does your TLM103 compare to the others?  
Why do you want to mod it. I thought Neumann used premium parts?  
 
 
LFO
 
4/8/2003 12:55 AM
Gus

The capsule is nice the electronics have an "edge" I don't like.
 
4/13/2003 4:20 PM
Ian Anderson

Gus,  
 
Have you got any mods for the Rode NT1 and if so, what do they do to the sound of the mic?  
 
Cheers... Ian :)
 
4/14/2003 4:36 PM
Mark
Gus,  
have you seen the Royer mods for the MXL2001?  
He supposedly gets it close to U47 specs!  
http://www.prosoundweb.com/recording/tapeop/tube_mic_25_1.shtml  
"-)
 

  Page 1 of 2 Next> Last Page>>