| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
| Brute |
Bias King Question I live in a small town and the nearest competent amp tech is 150 miles away. I'm thinking of buying a Bias King. Has anyone used one of these? I'm a low-tech sort of guy and I'm wondering if I can successfully re-bias my Fender Twin. |
|---|---|
| BWilliamson |
I like the Swamp Probes, the only difference is you will need a DVM. If you don't have one, getting a 1/2 way decent DVM will run you over the price of the bias king. Devices like this are a pretty handy DIY tool. bw |
|---|---|
| pgambon |
I considered the bias king, but got the Allesandro probe instead. I think it was $99 delivered. Works fine, simple to use. It only works on octal socket tubes (ie TwinRV). Look in Vintage Guitar under Hound Dog Amps. |
|---|---|
| R.G. |
- or build one for youself from the bias probe schematic at GEO. |
|---|---|
| Marc | your parts with an LCD will run you about $30.00. If your willing to spend a couple hours putting it together...agood weekend project GEO's got the info too for biasing with a probe.. GO for it! |
|---|---|
| Steve A. |
BW: I'm not sure about the decent DMM's but you can get the indecent ones really cheap these days (like around $30 for most of the ranges you'd need). So where is Charles (the Swamp Probe guy) these days? Haven't seen his posts here for awhile. (Last I heard his Swamp Probes were around $30 for one or $50 for a pair. And you would need a DMM with a dc mA scale since his probes don't use the 1.0R 1% cathode resistor.) Steve Ahola |
|---|---|
| BWilliamson |
MIA--Charles the Swamp guy
Well, he's got his own little board on his site he's been maintaining since the Ampage crash. He's also quite busy at the FDP. I think he really digs them old Fenders so he found a new home there. Their gain, our loss bw | |
|---|---|---|
| Page 1 of 3 | Next> | Last Page>> |