| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
ques. about KS 69 note below
:
 5/13/2000 10:03 PM |
|
rich |
ques. about KS 69 note below i read that the lazyfinger schem had a problem and the 220k resistor is supposed to be 220R. i did a mouser search and came up w/ this: MEC VITREOUS ENAMELED POWER RESISTOR C7 220R J is this what your talking about, just want to make sure im clear on what that is. ive never heard of a resistor w/ R for value. thanks! rich |
|---|---|
| 5/13/2000 11:08 PM |
|
| Cole |
When an "R" is used, as in "220R", it generally means "ohms", as in a two hundred and twenty ohm resistor (220 ohms). So you can get by with any 1/4 watt, 5% carbon film resistor that is 220 ohms. |
|---|---|
| 5/13/2000 11:23 PM |
|
| Stuart |
Redundant post Oops, I wasn't intentionally duplicating Cole's reply. It obviously appeared while I was writing mine... 1/4W would be fine, I prefer 1/2W because they're easier to read (getting old). |
|---|---|
| 5/14/2000 1:08 AM |
|
| rich |
thanks! that makes more sense (NT) thanks! |
|---|---|
| 5/13/2000 11:12 PM |
|
| Stuart |
Re: ques. about KS 69 note below For "R", read "ohms". So 220R just means 220 ohms. No need for a high power rating - ½W would be more than adequate. |
|---|---|
| Page 1 of 1 |