Fulltone Clyde Wah vs. Teese RMC3 - Speak out! Looking for opinions.

 :

6/12/2000 7:02 PM
Scott	Fulltone Clyde Wah vs. Teese RMC3 - Speak out! Looking for opinions. Looking to purchase one or the other. Need some feedback from you guys. Thanks.

 

6/13/2000 1:52 PM

Ian Anderson

Don't know about the Fulltone, but the RMC3 is the best wah I've ever had - a real noticeable improvement in tone over anything else I tried.     Plus, all those trimmers on the PCB let you dial in the tones you're after, even if it does take a while, the results are certainly worth it. The manual gives you starting points and the wah sounds great as stock in any case, I just tweaked it to how I wanted it - real thick!       ... Ian

 

6/14/2000 5:05 PM

Doug

Can't speak about the Teese, never tried it. The Clyde is good. Not as good as my 67 Italian Vox, but good. My biggest complaint about the Clyde is that with the tredle all the way back, you loose some volume as the highs are really rolled off. This is really noticeable with Strat. You can tweak the range internally, but it did not solve this problem. I have talked to Mike Fuller about it and he doesn't really have an answer. However the range is just astounding. This is one of the few wah's that really sounds good with HB's, IMO. Overall, a good wah, but I would try the Budda and the Teese before I bought this one.     Doug.

 

Page 1 of 1