| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
drill bit for pcs
:
 3/8/2000 10:01 PM |
|
blake |
drill bit for pcs Where can I find a drill bit smaller than 1/16" for drilling my pc boards? |
|---|---|
| 3/8/2000 10:48 PM |
|
| Steve Dallman |
In our area most hardware store carry small drill bits in the Dremel Tool section. Hobby shops also carry them. |
|---|---|
| 3/10/2000 4:10 AM |
|
| Bruce |
Right here Blake: http://www.allelectronics.com/cgi-local/SoftCart.exe/online-store/scstore/p-DRB-9.html?L+scstore+dmxb3030ffdddcdd+954606534 Wow! That was a long one! Bruce |
|---|---|
| 3/10/2000 5:16 AM |
|
| BWilliamson |
You still typing in links by hand Bruce? I could teach you a secret? bw |
|---|---|
| 3/10/2000 2:55 PM |
|
| Mark Hammer |
Any hobby store that caters to the model train/plane crowd will usually have an ample supply of "micro-hardware" implements and materials, including 1/32 drills, and other sizes in that vicinity. The best drill bits I have gotten for PC boards were obtained from a gemstone and jewellery show I wandered into in Dallas a couple years ago. These have nice wide shanks that chuck really solidly and hardly wiggle at all, even on a hobbyist drill press. So, although I've never been in one, my next suggestion is to try a lapidary shop (i.e., a store catering to gemstone hobbyists and stone carvers.). |
|---|---|
| Page 1 of 1 |