ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

MXR PC-BOARDS

:

12/9/1999 9:32 PM

MXR PC-BOARDS

So far I have counted 1800 Dyna-Comp PC-boards in 100 piece packages ready to send to who ever wants to order any, also have many boards I have not identified yet, it wont be long!Anyone interested in Dyna-comp only can send a money order for $15.00 in a self addressed, stamped envelope with quantity to: Bob Shumway
41 Highmanor Drive
Henrietta,N.Y. 14467

I will mail back same day with original schematic,and parts placement diagram.Everyone else who wants some of the other boards,will have to wait until I can finish sorting & counting them.PLEASE BE PATIENT!

12/10/1999 2:47 PM
Mark Hammer	Do you have the info you need to identify them? Perhaps some of us could help. Alternatively, if the identifying info is there and it's just a matter of waiting, then patience is my middle name.

12/10/1999 3:50 PM
Bob S.	I cant ID one board,same size as Dyna-Comp,but number on back is-157-3001-101. If anyone can help,let me know!

12/10/1999 9:10 PM
Mark Hammer	Useful clues for ID-ing would include: - the number and size of any chips used (e.g., traces for 2 8-pin chips and a 16 pin) - the number of obvious transistor pads Stellan Lehrberg used to have a picture of a noise gate board on his site as wallpaper. I don't know if it is still there. I can supply you with a scan of the Distortion+ board and the Envelope Filter, if that helps.

12/10/1999 9:17 PM
Bob S.	One 8 pin dip in the center for sure.If you can E-Mail me a scan I can tell right away if its one of those!

12/13/1999 7:23 PM
R.G.	Most likely a distortion plus.

12/16/1999 4:33 PM
CJ Landry	The Micro Amp was another one with one op amp in the middle. CJ

Page 1 of 2