ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Ibanez Overdrive II - New schematic

:

11/8/1999 7:21 PM

Ibanez Overdrive II - New schematic

I just finished drawing the Ibanez OD II and posting it at my web site. This is a major break through for me because what this means is that I am getting back to experimenting and repair things for myself instead of for someone else.

I miss it!!

Anyway, I have not had a chance to build this yet (gotta walk before you run) and I was hoping someone would build it and let me know. It is pretty simple. I am also tuning up my skills at Orcad and soon I hope to have this board on a PCB.

Thanks and enjoy,

http://www.compassnet.com/~cjlandry/schems/schemdir.html

CJ Landry

11/8/1999 8:04 PM
Aron	Look similar to the one I have on my website with a few changes. On the other hand it looks like a tube screamer with diodes to ground instead of in the feedback loop. Aron

11/9/1999 2:06 PM
MKB	Hi, CJ. What OrCAD software are you using? I have used Layout Plus and Capture at work for about six years now.

11/9/1999 11:00 PM
CJ Landry	I am using Capture ver. 9 and Layout 7.1. The Layout version is old and we never bought an upgrade. Hopefully this will change soon. CJ

11/10/1999 4:09 AM
R.G.	GEO sells a toner package for the OD II.

11/10/1999 1:59 PM
CJ Landry	Is it the same circuit RG? I remember you telling me you had the OD II and I am curious if what I traced is the same circuit you have? I have seen slight variations in the OD2. The circuit from the green OD2 and the orange OD2 are slightly different in the tone circuit. CJ

11/10/1999 2:24 PM
R.G.	I'll compare against what you have posted. There are slight variations in them, all right.

Page 1 of 2