| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
RG: Interested in Boss Schematics?
:
 5/4/1999 11:23 AM |
|
Dean Hazelwanter |
RG: Interested in Boss Schematics? I recently obtained service notes for the following Boss pedals: CE-3 Stereo Chorus SD-1 Super OverDrive BF-2 Flanger CS-2 Compression/Sustain DM-2 Delay Each of these service notes include a schematic, adjustment information, test waveforms, as well as a parts placement diagram (through which you can kind of make out the PCB tracks). If you're interested in making PCB layouts, toner transfer packages, or ready to solder PCBs available, all I would like in return are copies of the EasyTrax .pcb files. Since my plate is full right now with building the multi effects rack gizmo, I don't have time to do any more layouts myself until I finish what I've already started. Interested? If so, my vote for the first one off the RG line is the stereo chorus, followed by the flanger. |
|---|---|
| 5/6/1999 10:56 AM |
|
| Dean Hazelwanter |
How about it, any other takers? Since RG has graciously declined due to time constraints, I thought I'd widen the offer to everyone. My motivation is to be able to add a couple of these circuits to the rack-mount gizmo I'm making, but if I don't buckle-down and actually complete the circuits I've already laid out and partially built up, and build them into a cohesive unit, the project will drag on even longer. Having someone else lay out the PCBs would strike a happy medium. Like I said, all I request is source .pcb files of the layouts, and for the generous individual to make layouts available to the group. The only reason I request source is so I can place multiple layouts on the same toner transfer sheet. I would very much prefer EasyTrax layouts, but WinBoard is OK too. |
|---|---|
| 5/13/1999 7:48 AM |
|
| toneboy |
Re: RG: Interested in Boss Schematics? RE: BOSS schemos... I'm looking for the schemos on an OD-1 and and OD-3. Have 2 broken OD-1s. Want to see what difference(if any) is between OD-1 and the more recent OD-3. Would be willing to layout and possibly etch some pcbs if anyone's interested. Haven't been able to contact Roland in LA. They've moved their tech center and are difficult to raise on the phone. LMK |
|---|---|
| 5/13/1999 7:06 PM |
|
Mike Burgundy |
Re: also Interested in Boss Schematics? If you get them, IŽd also like to see them. I do have the OD-2, so...Mike Burgundy |
|---|---|
| Page 1 of 1 |