ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Re: Request for dish

:

11/26/1998 12:23 PM

Dean Hazelwanter

Re: Request for dish

I'm still not 100% sure exactly sure what the Flying Pan does, but it sounds like it's a phase shifter whose output is 'panned' between 2 outputs. Since I've also got a Craig Anderton phase shifter circuit built (which I recently re-laid out), I can try putting the phase shifter through the stereo trem/pong circuit, probably this weekend. That should give an interesting effect, with same and different LFO rates on the phase shifter and pong circuits.

12/1/1998 9:07 AM
Tobias Karlsson	Dean; Your idea sounds like a realy cool "spaceship" If you have some kind of schemaic on the stereo trem/pong circuit and how hook up the phase shifter I would be very glad to have a copy. How did your test turned out last weekend? Regards Tobias Karlsson in Sweden

12/2/1998 12:00 PM

Dean Hazelwanter

Thanks Tobias, but I didn't get a chance to try it last weekend, but hopefully I'll be able to try it this weekend. I was just planning to connect the normal (mono) output of the phase shifter to the combined inputs of the stereo trem/pong circuit. This way, the phase shifter signal will bounce between the 2 outputs.

I don't have a scanner to scan the modified schematic, but I'll figure out some way to convey what I've done.

12/3/1998 8:21 AM
Tobias Karlsson	Thanks Dean! I'm curious to hear about it! Tobias Karlsson in Sweden

12/7/1998 11:50 AM

Dean Hazelwanter

I got a chance to try the phase shifter through the stereo trem/pong circuit on the weekend. It sounded great, so both of those circuits will be going into the rack-mount multi-effects unit I'm building.

I drew up the schematic (modified from Craig Anderton's Tremolo circuit, as found on Justin Philpot's page) using WinDraft. It came out fairly well for using the package for the first time. I then did a screen capture and saved it as a jpg file. I'll email it to you if you like.

12/8/1998 7:24 AM
Tobias Karlsson	Thanks Dean! It sounds like a great project to build. I'll contact you in privat (so I don't take up unnecessary space here). Tobias Karlsson in Sweden

11/20/1998 1:18 PM
StLSD2000	It's a stereo phaser with panning with controls for feedback depth, pan speed, phase select (left or right), and phase speed. you can output it to one amp or two. it's powered by a 9 volt battery. so anyway... anyone got any ideas as to the problem or do I have to make a wav?

Page 3 of 4