ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

Bogner Bombards EL34s


 :
5/25/1998 5:32 PM
Dave Charneski
Bogner Bombards EL34s
I posted this question yesterday, but I  
don't think it got posted. I purchased a  
Bogner Shiva 1x12 combo recently. Of course,  
I had to take it apart and have a look-see.  
When I checked the cathode current on the  
EL34s, I was shocked to see that it was set  
to 70ma! I quickly checked the plate voltage  
and was even more shocked to find that it  
was 500V! That's 35W for zero signal plate  
dissipation. The Svetlana EL34s are rated  
for 25W. Now, the Shiva EL34s are housed  
in a stainless steel cage with a fan sucking  
air over them, but c'mon! I realize the  
25W rating is for CONVECTION cooling but  
can these tubes be safely pushed THAT hard  
with air blowing over them. The amp has  
performed flawlessly for two long, hot  
sweaty gigs and one rehearsal, so maybe  
it'll be OK. Your comments please....  
 
(Oh, one other thing, when I tried to reduce  
the cathode current, the pot bottomed out  
at 60ma! Apparently, this is no mistake.  
Could this be one of the ingredients in  
Reinhold Bogner's "secret sauce"? This  
amp IS the sweetest thing I've heard in 27  
years of playing.)  
 
Thanks,  
 
Dave Charneski
 
5/25/1998 8:16 PM
Charles

It got moved to GENERAL ( I lost it too )
 
5/26/1998 8:48 PM
Dave Charneski

Charles,  
 
Thanks, I'll check there now.  
 
Dave
 

  Page 1 of 1