| ampage Tube Amps / Music Electronics |
For current discussions, please visit Music Electronics Forum. |
ampage archive
Vintage threads from the first ten years
Filter Cap Value Question.
:
 6/1/1999 7:57 PM |
|
LSC |
Filter Cap Value Question. In here... Korea... theres not may value in Electrolytic Cap Value. 10uf, 22uf, 33uf, 47uf that's all but Deluxe Reverb needs 16uf! is it okay to use 22uf? and DR needs 25/50 cap but can I use 22/50 or 33/50? If it affects tone seriously I'll buy from US. let me know... PS) Sorry for my mass question. But I'll promise I'll make a DR Project Homepage for ampage and newbie than me. |
|---|---|
| 6/1/1999 8:53 PM |
|
| SpeedRacer |
22uF will work fine. Don't worry. you can use the 35/50 in place of the 25/50 cap as well. It's not a huge difference, so again, don't worry. You'll be fine. |
|---|---|
| 6/2/1999 6:45 AM |
|
| J Fletcher | If the 25/50 is the bias supply filter, you'd be better off going with a 100 volt rated cap. 100/100 for example....Jerry |
|---|---|
| 6/2/1999 6:44 AM |
|
| Steve Jones |
As Speedracer said, those values are OK, just be sure that the working voltage for the caps you use is equal to or greater than the ones you are replacing. Good luck! Steve |
|---|---|
| Page 1 of 1 |