ampage
Tube Amps / Music Electronics		 For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  

 

Fender tube reverb transformer


 :
10/8/1997 12:25 PM
Dion
 Fender tube reverb transformer
Hi,  
 
I need a replacement reverb transformer for a  
fender tube reverb.  
The 6G15 schematic says it's a 125A12A.  
My question: can I use a 125A20B reverb  
transformer, used in fender reverb amps? (the  
for the parallel 12AT7 driver)  
Or is only the 125A12A good for the job?  
Is there a difference between original  
125A12A's and the ones used in the '63  
reissue reverbs?  
 
Thanks,  
Dion
  
10/8/1997 12:58 PM
John Martin
Either trans should work. You can also use a Champ output trans if you have one lying around. You could also steal one out of the carcass of an old tube radio, as most of them used a single ended output scheme with a 50C5. Should be close enough. New ones should cost no more than $15.  
 
JM
  

  Page 1 of 1