nic Which glue for tolex? -- 5/5/2000 1:22 AM
   MIKE B I recently recovered a 2x12 fender ... -- 5/5/2000 3:02 AM
   Lee M. I use DAP contact cement with great... -- 5/5/2000 3:08 AM
   Casey4s Nic,You might find some help here >... -- 5/5/2000 4:17 AM
      Peter S I use tightbond cut with water........ -- 5/5/2000 1:27 PM
         SteveF I've got a couple amps done withTit... -- 5/6/2000 9:23 PM
            Peter S I thin it just a little.....about 6... -- 5/6/2000 11:30 PM
      nic Casey4s,I was inspired to ask this ... -- 5/5/2000 4:06 PM
         Casey4s Hi Nic,I don,t know why it wouldn't... -- 5/5/2000 5:36 PM
            Nils Hi,I still cannot open any of your ... -- 5/8/2000 11:31 AM
               Casey4s Nils,I am printing the entire thing... -- 5/9/2000 1:59 AM
   Winnie Thomas Here's another vote for DAP contact... -- 5/5/2000 11:53 AM
   Steve Jones Ahh, a sticky subject...One guy her... -- 5/5/2000 4:09 PM
      Jethro Tull Bodine ..TiteBond has a hide glue..premixe... -- 5/5/2000 4:17 PM
      Peter S hide glue works excellent and you c... -- 5/5/2000 7:35 PM
      Bruce Tear Mender is FABULOUS on everythi... -- 5/5/2000 11:24 PM
   pumpstein I've tried both the 3M Super 77 and... -- 5/5/2000 4:54 PM
   bill here is an interesting place with l... -- 5/5/2000 7:34 PM
      nic Thistothat.com is one of the cooles... -- 5/6/2000 6:51 PM
         Peter S Elmer's Carpenter glue is the same ... -- 5/6/2000 11:41 PM
   Michael Sullivan I've had Armadillo Amp Works build ... -- 5/5/2000 8:08 PM
      Peter S Great advice... -- 5/5/2000 11:47 PM
         MG Hi all,I do auto upholstery for a l... -- 5/6/2000 1:53 AM
            Bruce Besides, when it gets the slightest... -- 5/6/2000 5:36 AM
            Casey4s I still belive that godd old DAP co... -- 5/6/2000 12:52 PM
               Eric H Casey,If memory serves, you recomme... -- 5/6/2000 2:36 PM
                  Casey4s Eric,My reference to mineral spirit... -- 5/7/2000 12:10 AM
                     Eric H You are correct, it was apparently ... -- 5/7/2000 12:45 AM