ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

Warning: date() expects parameter 2 to be long, string given in /var/www/archive.ampage.org/index.php on line 214

Bevelling magnets 101


Wolfe Macleod	Bevelling magnets 101 Chuck a magnet into your drill press. Using a dremel tool,m preferably with a flexible shaft, and a small dionond cutting disk... Turn the drill press on. Turn the dremel on. Touch the diamond disk to the magnet lightly. If you so desire, you can then run a fine nail buffer across the bevelled end of the magnet to remove any burrs. If you further desire, you can sit on the magnet with the polishing section of the nail buffer in order to POLISH the bevel. You are finished.

Wolfe Macleod

Bevelling magnets 101

Chuck a magnet into your drill press.
Using a dremel tool,m preferably with a flexible shaft, and a small dionond cutting disk...
Turn the drill press on.
Turn the dremel on.

Touch the diamond disk to the magnet lightly.

If you so desire, you can then run a fine nail buffer across the bevelled end of the magnet to remove any burrs.
If you further desire, you can sit on the magnet with the polishing section of the nail buffer in order to POLISH the bevel.

You are finished.

Replies:

Zhangliqun I've always wondered -- why bevel a... -- 4/5/2006 6:15 PM