ampage
Tube Amps / Music Electronics
For current discussions, please visit Music Electronics Forum. New: view Recent Searches.
New: visit Schematic Hell!
The sunn still shines online!

 
Listen to great tunes streaming live right now!

ampage archive

Vintage threads from the first ten years

Search for:  Mode:  
previous: Dave Stephens Fred: the insulation on the soderon... -- 1094952845 View Thread

Re: Usable wire? - Soderon?

9/11/2004 8:20 PM
JabsRe: Usable wire? - Soderon?
Folding the paper and drawing down the wire as Dave described certainly works. Another way [which we used with relay coils back in the 70's---REALLY fine wire] is to lay the wire on a somewhat soft surface, like cardboard, and sand it. This resulted in much less frequent breakage of the wire as it apparently gives a bit more control over the applied pressure. It's not really necessary to remove the insulation all around the circumference of the wire. Fifty percent will probably do, but the more the merrier.

 
Replies:
jason lollar I did some quantiy testing on the s... -- 9/13/2004 10:42 AM