ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Mark Lavelle I wouldn't assume the OT is dead, a... -- 1139126500

Re: Rreverberocket II trouble

2/5/2006 2:11 PM
Robert	Re: Rreverberocket II trouble Thanks Mark, I tried testing it via the Tube Amp Debug Page, measuring the impeadence from the output tube plate to the B+ point on the filter cap. and get a reading of 96 ohms. Seems within reason, but can an output transformer spark and smoke three times without damage? Should my next step be to just put two new power tubes in it and see what happens? Thanks again.

2/5/2006 2:11 PM

Robert

Re: Rreverberocket II trouble

Thanks Mark,

I tried testing it via the Tube Amp Debug Page, measuring the impeadence from the output tube plate to the B+ point on the filter cap. and get a reading of 96 ohms. Seems within reason, but can an output transformer spark and smoke three times without damage? Should my next step be to just put two new power tubes in it and see what happens?

Thanks again.

Replies:

Rob Mercure NO!!!! After smoking the amp and bl... -- 2/5/2006 4:34 PM