ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Enzo Most of these do have split supplie... -- 1094104420

Re: Gorilla GG20

9/3/2004 5:25 AM
Andy	Re: Gorilla GG20 Thanks guys. I think I found the problem. I was checking for DC on the speaker and I had it. But as I was moving the board and looking it over, it went away and so did the hum. I started to look for loose grounds and bad solder joints. Resoldered a few joints that looked iffy and resoldered the ground and the thing works. So, I am not sure where exactly the problem was. I do appreciate all the help though!!!

9/3/2004 5:25 AM

Andy

Re: Gorilla GG20

Thanks guys. I think I found the problem. I was checking for DC on the speaker and I had it. But as I was moving the board and looking it over, it went away and so did the hum. I started to look for loose grounds and bad solder joints. Resoldered a few joints that looked iffy and resoldered the ground and the thing works. So, I am not sure where exactly the problem was.

I do appreciate all the help though!!!

Replies:

Dr. Photon That's good that you could fix it w... -- 9/4/2004 2:25 PM