ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: aaron how the hell did you open it up? mi... -- 1113226318

Re: Fizz with Mini Mass

4/11/2005 10:14 AM
Al Lang	Re: Fizz with Mini Mass Allen head screws on the sides, you need a little hex Allen head wrench. Don't take the bigger bottom hex nut out just the sides. You will see a radial, bi-polar cap on the bottom of the by pass switch which is 1 uf @ 50v, change it to a 4.7 uf or higher for more treble but you don't need the boost at medium to high volume only when you choke the amp down to very low levels highs are lost. If you look at weber's site the standard mass has a three way small togle switch for stock 0, 3 db and 6 db boost. I'm still trying to figure out how to wire a switch in like the one in the Stardard Mass...? Al

4/11/2005 10:14 AM

Al Lang

Re: Fizz with Mini Mass

Allen head screws on the sides, you need a little hex Allen head wrench. Don't take the bigger bottom hex nut out just the sides. You will see a radial, bi-polar cap on the bottom of the by pass switch which is 1 uf @ 50v, change it to a 4.7 uf or higher for more treble but you don't need the boost at medium to high volume only when you choke the amp down to very low levels highs are lost.

If you look at weber's site the standard mass has a three way small togle switch for stock 0, 3 db and 6 db boost. I'm still trying to figure out how to wire a switch in like the one in the Stardard Mass...?

Al

Replies:

Dale So my 5e3 has started the fizz, muc... -- 4/11/2005 11:41 PM