ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Steve A. James: &nb... -- 6/14/2003 8:59 PM

Re: Post PI Master on BF Fender

6/16/2003 10:31 AM
gazza	Re: Post PI Master on BF Fender Steve, So the bruce collins schematic you have on your site does not have this asym distortion selectivity ? where does the 'cross line MV' connect to then, closer to the tubes that the bias resistors ? does it matter if you have a cathode bias or fixed bias output stage ? just wondering as I have a small (2*el84) amp that has a post PI MV, which is often turned down (neighbours etc.) quite far. I can't quite remember which circuit i used in the end. G.

6/16/2003 10:31 AM

gazza

Re: Post PI Master on BF Fender

Steve,

So the bruce collins schematic you have on your site does not have this asym distortion selectivity ?

where does the 'cross line MV' connect to then, closer to the tubes that the bias resistors ?

does it matter if you have a cathode bias or fixed bias output stage ?

just wondering as I have a small (2*el84) amp that has a post PI MV, which is often turned down (neighbours etc.) quite far. I can't quite remember which circuit i used in the end.

G.