Tube Amps / Music Electronics
|For current discussions, please visit Music Electronics Forum.||The sunn still shines online!|
|previous: bob p mike,
|11/21/2003 9:41 PM|
|John G||Re: Which MV to use in the AB763 circuit?|
To negate the possibility of the bias voltage failing add a larger resitor say 2-5 times the MV value and connect between the wiper and the bias node point. I have experienced a similar problem with the bias driven tremolo ccts, I usually add a 1M resistor (across the 250K pot in a Fender)to ensure bias is always present. Another way would to feed the signal from the splitter into the wiper of the MV pot, then bias will remain intact. I don't know what this configuration would sound like though.
|Shea [QUOTE]Another way would to feed th... -- 11/21/2003 10:37 PM|