ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: jraden I've salvaged some parts from an ol... -- 2/9/2000 1:07 PM

Re: wire wrap and dead bug

2/9/2000 1:32 PM
Dave H.	Re: wire wrap and dead bug It should be OK for the low current of most effects. You can do the power and grounds as a "ring main" e.g. for the 9V supply start at your board 9V input pin then wrap to the next nearest 9V connection point then on to the next nearest 9V point and so on until you have connected up all the 9V points then connect a wire from the last 9V point back to the 9V input pin to complete the ring. It’s still only have two wraps per pin but you get two wires to share the current. Dave

2/9/2000 1:32 PM

Dave H.

Re: wire wrap and dead bug

It should be OK for the low current of most effects. You can do the power and grounds as a "ring main" e.g. for the 9V supply start at your board 9V input pin then wrap to the next nearest 9V connection point then on to the next nearest 9V point and so on until you have connected up all the 9V points then connect a wire from the last 9V point back to the 9V input pin to complete the ring. It’s still only have two wraps per pin but you get two wires to share the current.

Dave