ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: tony Bought this used and replaced the w... -- 11/13/1999 7:45 PM

Re: digitech dsp128 help

11/13/1999 11:37 PM
Steve A.	Re: digitech dsp128 help Tony: I bought a used DSP128 Plus without a manual a few years ago and called Digitech/DOD to order one. They mailed me one right away no charge. You might try giving them a call. So does it power up, only it doesn't do anything? To reset the ROM to the factory settings you hold down a few keys when turning the power on. I just looked it up and to restore the factory presets, you hold down the "Down" and "Left" buttons on powerup. To initiate the self test, hold down the "Right" and "Up" buttons on powerup, which should result in the display being "8.8.8.8." Pushing any of the function keys will then start the test. And holding down the "Down" and "Right" buttons during powerup will display the software revision number. I don't know if any of this applies to the older DSP 128 you mentioned, but you might give it a try. Steve Ahola

11/13/1999 11:37 PM

Steve A.

Re: digitech dsp128 help

Tony:

    I bought a used DSP128 Plus without a manual a few years ago and called Digitech/DOD to order one. They mailed me one right away no charge. You might try giving them a call.

    So does it power up, only it doesn't do anything? To reset the ROM to the factory settings you hold down a few keys when turning the power on.

    I just looked it up and to restore the factory presets, you hold down the "Down" and "Left" buttons on powerup. To initiate the self test, hold down the "Right" and "Up" buttons on powerup, which should result in the display being "8.8.8.8." Pushing any of the function keys will then start the test. And holding down the "Down" and "Right" buttons during powerup will display the software revision number.

    I don't know if any of this applies to the older DSP 128 you mentioned, but you might give it a try.

Steve Ahola

Replies:

tony Thanks Steve but I don't have "left... -- 11/14/1999 1:15 AM