ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: BIG Dave I installed a Joe Barden STRAT STAN... -- 8/22/1999 10:39 PM

Re: Joe Barden Standard Strat Pickup

8/23/1999 12:31 AM
JohnC	Re: Joe Barden Standard Strat Pickup Even if you play it on it's own? If that happends when you use it with the middle one (position 4 at the selector), and if your Barden p/u is one of those single coil sized humbuckers, maybe it's out of phase with the other p/u... It's easy to change the conections (only two cables) to correct that. Sorry if you knew all this allready, or if that isn't the thing. I just had a "similar" problem with a SD hot rail which I corected that way, but now, I don't get the hum canceling efect when I use the SD hot rail (bridge) along with the stock middle p/u ( jc

8/23/1999 12:31 AM

JohnC

Re: Joe Barden Standard Strat Pickup

Even if you play it on it's own?

If that happends when you use it with the middle one (position 4 at the selector), and if your Barden p/u is one of those single coil sized humbuckers, maybe it's out of phase with the other p/u...

It's easy to change the conections (only two cables) to correct that.

Sorry if you knew all this allready, or if that isn't the thing.

I just had a "similar" problem with a SD hot rail which I corected that way, but now, I don't get the hum canceling efect when I use the SD hot rail (bridge) along with the stock middle p/u

(

jc

Replies:

BIG Dave I'm referring to when I use the pic... -- 8/24/1999 3:07 PM