ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: JCS Hey Reverb,Great Idea! Could you ex... -- 6/29/2000 11:03 PM

Re: disconnecting the tone stack

6/30/2000 9:19 AM
ChrisW	Re: disconnecting the tone stack I did have the same idee as Reverb ..... Btw , if you disconnect the blackface-tonestack you get MORE bass ....... Connect the 2 68k resistors in parallel from the input/1 M res. to the first grid . Use a 1 M ( ? ) between the mid-pot/6k8 and the ground to lessen the "pop" . I'll put this on my homepage , when that is ready . Allen amps uses this trick and they call it the RawSwitch . Good luck ! Chris

6/30/2000 9:19 AM

ChrisW

Re: disconnecting the tone stack

I did have the same idee as Reverb .....

Btw , if you disconnect the blackface-tonestack you get MORE bass .......

Connect the 2 68k resistors in parallel from the input/1 M res. to the first grid .

Use a 1 M ( ? ) between the mid-pot/6k8 and the ground to lessen the "pop" .

I'll put this on my homepage , when that is ready .

Allen amps uses this trick and they call it the RawSwitch .

Good luck !

Chris

Replies:

JCS Thanks for all the input everyone. ... -- 6/30/2000 12:35 PM
dgiust I'd like to offer my suggestion, ki... -- 6/30/2000 3:06 PM