ampage Tube Amps / Music Electronics	For current discussions, please visit Music Electronics Forum.

ampage archive

Vintage threads from the first ten years

previous: Peter Michaux Re: Don't choose... build both. It's easy? -- 6/15/2000 7:44 PM

Couple of corrections

6/16/2000 2:50 PM
Ryan	Couple of corrections Nice job, but there are a couple of things that wouldn't work so well... -Remove the 47k resistor from the cathode bypass caps on V1 and V2A, the negative end of the cap should go directly to ground -The 82pf/2.2M RC "network" after the coupling cap of V1 should STILL have the .002mf/680K RC network connected. LDR #4 is connected in dist. mode. I'd just use a single .002mf/470K network and elminate the 2.2M going to ground... it works for Soldano That should do it! -Ryan

6/16/2000 2:50 PM

Ryan

Couple of corrections

Nice job, but there are a couple of things that wouldn't work so well...

-Remove the 47k resistor from the cathode bypass caps on V1 and V2A, the negative end of the cap should go directly to ground

-The 82pf/2.2M RC "network" after the coupling cap of V1 should STILL have the .002mf/680K RC network connected. LDR #4 is connected in dist. mode. I'd just use a single .002mf/470K network and elminate the 2.2M going to ground... it works for Soldano

That should do it!
-Ryan

Replies:

Peter Michaux Thanks AS and Ryan. I made those co... -- 6/16/2000 3:52 PM